SET_START_CONSTITUTION

This command is available with the POLY and ED-EXP modules.

This command is similar to SET_ALL_START_VALUES, but is used for an individual phase that may have a wrong constitution.

Syntax	set_start_constitution
Prompts	Phase name: <Name of a phase, and possible major constituent(s)> Specify the name of a phase for which the constitution shall be set. If there is a major constituent of the phase, you must specify this on the same line as the phase name. By giving an*, select the default major constituents. A $ means keeping the same constitution, and `NONE` means to give individual site-fractions.
	Y(<Phase>#<Composition_set>,<Constituent>#<Sublattice>) /xxx/: <SF> The site fraction (`SF`) of the constituent shall be given. The default value `xxx` is the last calculated one.

Syntax

set_start_constitution

Prompts

Phase name: <Name of a phase, and possible major constituent(s)>

Specify the name of a phase for which the constitution shall be set.

If there is a major constituent of the phase, you must specify this on the same line as the phase name. By giving an*, select the default major constituents. A $ means keeping the same constitution, and NONE means to give individual site-fractions.

Y(<Phase>#<Composition_set>,<Constituent>#<Sublattice>) /xxx/: <SF>

The site fraction (SF) of the constituent shall be given. The default value xxx is the last calculated one.