LIST_STATUS

This command is for the Gibbs Energy System (GES) module.

Syntax

LIST_STATUS

 

List the entered elements, phases and species with the status word. The command is included for system managers.

Each element, species, phase and symbol has a set of status bits. The values of these bits are listed with this command.

The bits are listed as hexadecimal, i.e. four bits are written as a hexadecimal number. Two hexadecimal numbers make a byte. In hexadecimal, 0 to 9 mean normal digits. A to F means values 10 to 15. The number E4000000 has thus bit 1, 2, 3 and 6 equal to one. The bits are numbered starting with 1 for the most significant (leftmost) bit.

Set the element status word (Bit. Meaning) if:

  1. Element cannot be deleted (only vacancy and electron)
  2. Suspended (inclusive OR of bit 3 and 4)
  3. Explicitly suspended
  4. Implicitly suspended (cannot occur for an element)

Set species status word (Bit. Meaning) if:

  1. Species record for an element (each element has a species record)
  2. Suspended (inclusive OR of bit 3 and 4)
  3. Explicitly suspended
  4. Implicitly suspended (e.g. if a species element is suspended)
  5. Charged (inclusive OR of bit 6 and 7)
  6. Negative charge
  7. Positive charge
  8. Vacancy
  9. Component (by default the elements are the components)

Set phase status word (Bit. Meaning) if:

  1. Ideal (no sublattices and no excess parameters)
  2. Suspended (inclusive OR of bit 3 and 4)
  3. Explicitly suspended
  4. Implicitly suspended (e.g. if all constituents suspended)
  5. Gas phase
  6. Liquid phase
  7. Solution phase
  8. Only one constituent (in each sublattice)
  9. Ions (inclusive OR of bit 10 and 12)
  10. New ionic liquid model (charge balance handled internally)
  11. Constituents cannot be added
  12. External charge balance needed
  13. Aqueous model
  14. Charged species (ions)
  15. Dilute entropy
  16. Last calculation exceeded temperature range for any parameter
  17. Kapoor-Frohberg-Gaye cell model
  18. Turbo calculation used
  19. Turbo calculation impossible
  20. Turbo calculation illegal
  21. Phase is not ideal
  22. Current site fractions saved
  23. This phase is the ordered part
  24. This phase is the disordered part (bit 2 and 3 also set)
  25. Shadow phase with diffusion data
  26. Error in ionic model
  27. Sometimes
  28. CVM-SRO (short-range ordering) entropy expression
  29. CVM initialization is made
  30. Used to test quasi-chemical ordering model
  31. Major constituents check even if no miscibility gap (ordering)
  32. Hoch-Arpshofen model

Set symbol status word (Bit meaning) if:

  1. Constant
  2. Variable
  3. Function
  4. Table
  5. Value must not be amended
  6. Undefined