LIST_ALL_VARIABLES

This command is for the PARROT module.

Create a list of the values and status of all variables in the PARROT workspace on screen or in a text file. After an optimization some statistical information is also written. The correlation matrix is written if that option is chosen.

SET_OUTPUT_LEVELS.

Syntax	list_all_variables
Prompt	Output to screen or file /Screen/: <File name> A list of the current values and status, as well statistical information (if after optimization) and the correlation matrix (optionally), for all variables is written on screen (by pressing <Enter>) or on the list file under a specific file name which can later on be opened and edited by basic text editor.
	Example The following is the listed variables for the example TCEX36, after the first optimization when having set all variables available for optimization. == OPTIMIZING VARIABLES == AVAILABLE VARIABLES ARE V1 TO V00 VAR. VALUE START VALUE SCALING FACTOR REL.STAND.DEV V1 2.03729090E+04 2.03688352E+04 2.03688352E+04 3.41524152E+00 V2 -2.94286372E+01 -2.94286372E+01 -2.94286372E+01 2.37944771E+00 V11 -2.17373936E+04 -2.18095983E+04 -2.18095983E+04 3.97086303E-02 V12 1.52107184E+01 1.51660547E+01 1.51660547E+01 5.84552327E-02 V15 2.42082351E+04 2.45139169E+04 2.45139169E+04 5.00914471E+00 V16 -8.38723972E+00 -8.83460472E+00 -8.83460472E+00 1.60961318E+01 V17 3.08916533E+03 3.15802558E+03 3.15802558E+03 9.63738108E+00 V19 2.20292586E+04 2.21385673E+04 2.21385673E+04 4.14274011E+01 V20 -7.04217974E+00 -7.22424882E+00 -7.22424882E+00 1.00561540E+02 NUMBER OF OPTIMIZING VARIABLES : 9 ALL OTHER VARIABLES ARE FIX WITH THE VALUE ZERO THE SUM OF SQUARES HAS CHANGED FROM 8.00002729E+04 TO 8.00002719E+04 DEGREES OF FREEDOM 45. REDUCED SUM OF SQUARES 1.77778382E+03

Syntax

list_all_variables

Prompt

Output to screen or file /Screen/: <File name>

A list of the current values and status, as well statistical information (if after optimization) and the correlation matrix (optionally), for all variables is written on screen (by pressing <Enter>) or on the list file under a specific file name which can later on be opened and edited by basic text editor.

Example

The following is the listed variables for the example TCEX36, after the first optimization when having set all variables available for optimization.

== OPTIMIZING VARIABLES ==

AVAILABLE VARIABLES ARE V1 TO V00

VAR. VALUE START VALUE SCALING FACTOR REL.STAND.DEV

V1 2.03729090E+04 2.03688352E+04 2.03688352E+04 3.41524152E+00

V2 -2.94286372E+01 -2.94286372E+01 -2.94286372E+01 2.37944771E+00

V11 -2.17373936E+04 -2.18095983E+04 -2.18095983E+04 3.97086303E-02

V12 1.52107184E+01 1.51660547E+01 1.51660547E+01 5.84552327E-02

V15 2.42082351E+04 2.45139169E+04 2.45139169E+04 5.00914471E+00

V16 -8.38723972E+00 -8.83460472E+00 -8.83460472E+00 1.60961318E+01

V17 3.08916533E+03 3.15802558E+03 3.15802558E+03 9.63738108E+00

V19 2.20292586E+04 2.21385673E+04 2.21385673E+04 4.14274011E+01 V20 -7.04217974E+00 -7.22424882E+00 -7.22424882E+00 1.00561540E+02

NUMBER OF OPTIMIZING VARIABLES : 9

ALL OTHER VARIABLES ARE FIX WITH THE VALUE ZERO

THE SUM OF SQUARES HAS CHANGED FROM 8.00002729E+04 TO 8.00002719E+04

DEGREES OF FREEDOM 45. REDUCED SUM OF SQUARES 1.77778382E+03