SET_COLOR

Some devices support colours or line thickness. With this command, select different colors or line types on some types of information on a diagram.

This command can fail if a chosen device does not support colors or line thickness.

This command gives four sequential prompts (i.e. text and axis, invariant equilibria, tie-lines, and all other lines), with the keyword and default option (both listed below). Depending on if the switched-on graphic device (by SET_PLOT_FORMAT) supports colors or line types, the POST automatically switches on the appropriate Keyword.

Syntax	set_color
Prompt	Text and axis keyword /Default option/ <Return or new option> Invariant equilibria keyword /Default option/: <Return or new option> Tie-lines color keyword /Default option/: <Return or new option> Keyword of all other lines /Default option/: <Return or new option> This is usually for the solubility lines.
	The Keyword is either Color or LineType, depending on if color or line type is supported by the switched-on graphic device (by SET_PLOT_FORMAT); the POST module automatically switches on the appropriate Keyword .