SET_CORNER_TEXT

Adds text to the corners on a plotted diagram. Normally, you can write such texts as a subtitle.

The primary database (not the appended ones) used in calculations and the calculated conditions are automatically plotted at the upper-left corner as a part of the header on all plotted diagram. Unless the plotting option WRITE CONDITIONS is switched off by the command SET_PLOT_OPTIONS, the calculated conditions are always written on plotted diagrams; and only when the plotting option PLOT HEADER is switched off by the command SET_PLOT_OPTIONS, the used database also always appear. Under such circumstance, avoid writing texts at the UPPER_LEFT corners.

Syntax

set_corner_text

Prompt

Corner/Lower_Left/: <Return or new option>

Choose an option:

  • LOWER_LEFT
  • UPPER_LEFT
  • UPPER_RIGHT
  • LOWER_RIGHT
  • TOP_OF_TRIANGLE
 

Text: <Texts as a subtitle or a note>

Write the texts that are to be written on the specified diagram corner.