CREATE_DIVIDERS
This command is for the REACTOR_SIMULATOR (REACTOR) module.
Define the segment boundaries and the ways on how to distribute phases between various segments and to split the feeds of heat and mass.
|
Syntax |
CREATE_DIVIDERS |
|
Prompts |
Number of dividers /4/: <The number of dividers> Specify the number of dividers (boundaries between various segments) in the reactor. It is normally the segment number plus one: for example, if the stage box number is defined as 4, the divider number should be defined as 5. |
|
Number of outputs for divider # /3/: <The number of outputs> Specify the number of outputs for a specific divider #. |
|
|
Percent of input to output 1 /100/: <Percent of input> Define the percentage of input to the output 1 in the current divider #. |
|
|
Percent of input to output ## /100/: <Percent(s) of input(s)> Define the percentages of inputs to the outputs ## in the current divider #. It is repeated till the last output is specified. |