CREATE_PIPES

This command is for the REACTOR_SIMULATOR (REACTOR) module.

Define the pipes between various segments and the ways on how the mass and heat transport between the surroundings (with the record number as 0) and the reactor, among various segments in the reactor, and along various dividers (segment boundaries in the reactor).

Syntax	CREATE_PIPES
Prompts	From record: <A record number> Specify a record number. If there are four segments in the reactor, these records are available: `0` surroundings `1-4` stage boxes (segments) `5-9` dividers (segment boundaries)
	Pipe to record: <Another record number> Specify another record number to which the mass or heat flows from the current record (specified above). Before this prompt, a message shown on the screen indicates what kind of mass or heat flow (according to the definitions of stage boxes and dividers, which have already been created prior to this command) should be specified in the pipe. This is repeated for all inputs and/or outputs for mass and/or heat in current record.

Syntax

CREATE_PIPES

Prompts

From record: <A record number>

Specify a record number. If there are four segments in the reactor, these records are available:

0 surroundings
1-4 stage boxes (segments)
5-9 dividers (segment boundaries)

Pipe to record: <Another record number>

Specify another record number to which the mass or heat flows from the current record (specified above). Before this prompt, a message shown on the screen indicates what kind of mass or heat flow (according to the definitions of stage boxes and dividers, which have already been created prior to this command) should be specified in the pipe. This is repeated for all inputs and/or outputs for mass and/or heat in current record.