REACTOR Module Example

This is a simple reactor model with output of gases at the top and output of condensed phases at the bottom. The gas phase from one segment flows to higher segments, 80% reacts in the first above, 15% in the second above and 5% in the third above.

The condensed phases flow downwards and all of it goes to the next lowest segment. Heat can be added at any module. The only way to specify the initial state of the reactants added to the reactor is to specify the heat content.

This uses the SSUB database. A license is required to run the example.

These commands are of note and used in this example:

• DEFINE_SPECIES
• CREATE_STAGE_BOXES
• CREATE_DIVIDERS
• CREATE_PIPES
• START_SIMULATION