Scheil in Graphical Mode vs Console Mode

Type of Calculation	Console Mode	Graphical Mode
Classic Scheil	Use the START_WIZARD command to answer prompts	Scheil Calculator > click the Classic Scheil button on the Configuration window. On the My Project Configuration window under Getting Started, click Quick Start and select Scheil solidification simulation.
Scheil with back diffusion in the primary phase	USE_BACK DIFFUSION command (turn on) then use the START_WIZARD command to answer prompts	Scheil Calculator > click the Scheil with back diffusion in the primary phase button on the Configuration window then enter the settings as needed. A mobility database is required.
Scheil with solute trapping	SOLUTE_TRAPPING command (turn on) then use the START_WIZARD command to answer prompts	Scheil Calculator > click the Scheil with solute trapping button on the Configuration window then enter the settings as needed.
Fast diffusers and Classic Scheil	Use the START_WIZARD command to answer the prompt`Fast diffusing components`where you enter the elements that diffuse fast in solid phases and can assume to be in equilibrium in the whole phase. E.g. C in a steel.	Scheil Calculator > click the Classic Scheil button plus one or more of the Fast diffuser checkboxes next to the composition(s) on the Configuration window then enter the settings as needed.
Fast diffusers and Scheil with back diffusion in the primary phase	USE_BACK DIFFUSION command (turn on) then use the START_WIZARD command to answer the prompt `Fast diffusing components`where you enter the elements that diffuse fast in solid phases and can assume to be in equilibrium in the whole phase. E.g. C in a steel.	Scheil Calculator > click the Scheil with back diffusion in the primary phase button plus one or more of the Fast diffuser checkboxes next to the composition(s) on the Configuration window then enter the settings as needed. A mobility database is required.
Homogenization	Use the EVALUATE_SEGREGATION_PROFILE command before START_WIZARD to generate the segregation profile to file. In DICTRA_MONITOR use INPUT_SCHEIL_PROFILE for use of segregated profile in simulation. An additional license to the Diffusion Module (DICTRA) is needed to work with more than three components.	Use the Homogenization template under Non-Equilibrium to automatically set up the project tree with the defaults needed to work with this. An additional license to the Diffusion Module (DICTRA) is needed to work with more than three components.

Classic Scheil

Use the START_WIZARD command to answer prompts

Scheil Calculator > click the Classic Scheil button on the Configuration window.

On the My Project Configuration window under Getting Started, click Quick Start and select Scheil solidification simulation.

Scheil with back diffusion in the primary phase

USE_BACK DIFFUSION command (turn on) then use the START_WIZARD command to answer prompts

Scheil Calculator > click the Scheil with back diffusion in the primary phase button on the Configuration window then enter the settings as needed. A mobility database is required.

Scheil with solute trapping

SOLUTE_TRAPPING command (turn on) then use the START_WIZARD command to answer prompts

Scheil Calculator > click the Scheil with solute trapping button on the Configuration window then enter the settings as needed.

Fast diffusers and Classic Scheil

Use the START_WIZARD command to answer the promptFast diffusing componentswhere you enter the elements that diffuse fast in solid phases and can assume to be in equilibrium in the whole phase. E.g. C in a steel.

Scheil Calculator > click the Classic Scheil button plus one or more of the Fast diffuser checkboxes next to the composition(s) on the Configuration window then enter the settings as needed.

Fast diffusers and Scheil with back diffusion in the primary phase

USE_BACK DIFFUSION command (turn on) then use the START_WIZARD command to answer the prompt Fast diffusing componentswhere you enter the elements that diffuse fast in solid phases and can assume to be in equilibrium in the whole phase. E.g. C in a steel.

Scheil Calculator > click the Scheil with back diffusion in the primary phase button plus one or more of the Fast diffuser checkboxes next to the composition(s) on the Configuration window then enter the settings as needed. A mobility database is required.

Homogenization

Use the EVALUATE_SEGREGATION_PROFILE command before START_WIZARD to generate the segregation profile to file. In DICTRA_MONITOR use INPUT_SCHEIL_PROFILE for use of segregated profile in simulation. An additional license to the Diffusion Module (DICTRA) is needed to work with more than three components.

Use the Homogenization template under Non-Equilibrium to automatically set up the project tree with the defaults needed to work with this. An additional license to the Diffusion Module (DICTRA) is needed to work with more than three components.