Scheil Calculator Available Plot Variables

When working with Scheil calculations in Graphical Mode, there are several plot variables available with the Plot Renderer that is a successor to the Scheil Calculator.

For a comparable list in Console Mode, see State Variables for Scheil.

The following list is specific to a Plot Renderer that is a successor to a Scheil Calculator. The software includes relevant variables in the Axis variable list based on the set up of the Scheil Calculator.

There may be some additional variables available if the calculation involves the Diffusion Module (DICTRA) and/or other specialized databases are used.

When certain variables are selected (i.e. electric or thermal conductivity, electric or thermal resistivity, or thermal diffusivity), there are additional settings related to these described in Plot Renderer: Configuration Settings.

Quantities Groups Available for Plots and Tables

Quantities
Apparent heat capacity per gram	Apparent heat capacity per mole
Apparent volumetric CTE	Average composition of solid phases
Composition of a phase	Density
Distribution of component in phase	Driving force for evaporation per mole
Dynamic viscosity	Electric conductivity
Electric resistivity	Evaporation enthalpy per mole
Heat per gram	Heat per mole
Kinematic viscosity	Latent heat per gram
Latent heat per mole	Mass fraction of liquid
Mass fraction of solid	Mass fraction of solid phase
Molar mass of gas	Molar volume
Molar volume of phase	Mole fraction of liquid
Mole fraction of solid	Mole fraction of solid phase
Site fraction	Surface tension
Temperature	Thermal conductivity
Thermal diffusivity	Thermal resistivity
Volume fraction of liquid	Volume fraction of solid
Volume fraction of solid phase