State Variables for Scheil
Post processing is done the same way as POLY-3: specific variables for plotting in the Scheil module are listed.
For a comparable list in Graphical Mode, see Scheil Calculator Available Plot Variables.
The variables can be plotted along the X- and Y-axes. In the table, ph is an abbreviation of phase, and el is an abbreviation of element. An asterisk (*) can be used as a wild character for el and ph. Use the abbreviations of the variables when you specify what the X- and Y-axes represent in a diagram.
| Abbreviation | State Variable |
|---|---|
|
T |
Temperature in Celsius |
|
NL/BL/VL |
Mole/mass fraction of liquid |
|
NS/BS/VS |
Mole/mass fraction of all solid phases |
|
NS(ph)/BS(ph) |
Mole/mass fraction of a solid phase |
|
VS(ph) |
Volume fraction of a solid phase |
|
W(ph,el) |
Weight fraction of an element in a phase |
|
X(ph,el) |
Mole fraction of an element in a phase |
|
Y(ph,el) |
Site fraction of an element in a phase |
|
NN(ph,el) |
Distribution of an element in a phase |
|
NH/BH |
Total heat per mole/gram (top curve) and Latent heat per mole/gram (bottom curve) |
|
CP/BCP |
Apparent heat capacity per mole/gram |
|
NV/NV(ph) |
Molar volume of the system or a phase |
|
DS/DS(ph) |
Average density of the system or a phase |
|
BT |
Apparent volumetric CTE of the system |
|
DVIS(ph) |
Dynamic viscosity of a phase |
|
KVIS(ph) |
Kinematic viscosity of a phase |
|
SURF(ph) |
Surface tension of a liquid phase |
|
ELRS/ELRS(ph) |
Electrical resistivity of the system or a phase |
|
ELCD/ELCD(ph) |
Electrical conductivity of the system or a phase |
|
THCD/THCD(ph) |
Thermal conductivity of the system or a phase |
|
THRS/THRS(ph) |
Thermal resistivity of the system or a phase |
|
THDF/THDF(ph) |
Thermal diffusivity of the system or a phase |
|
DGV |
Driving force for evaporation |
|
DHV |
Evaporation enthalpy |
|
MMG |
Molar mass of gas |
|
XAVG(el) |
Mole fraction of an element in solid phases |
|
WAVG(el) |
Mass fraction of an element in solid phases |