CREATE_NEW_EQUILIBRIUM

This command is available with the POLY and ED-EXP modules.

During data-assessments using the ED_EXP module (a submodule of PARROT), you can, in the POLY module, create several equilibria with different sets of conditions and phases (but normally with the same set of components). By default, there is one equilibrium. To keep the set of conditions and phase for this equilibrium, create another one using this command, and use another set of conditions for that. Two equilibria may be useful to calculate easily the enthalpy difference between two states. In the PARROT module, the experimental information is stored as a sequence of equilibria.

Syntax	CREATE_NEW_EQUILIBRIUM
Prompts	Equilibrium number /2/: <A new equilibrium number> Each equilibrium in the POLY workspace is identified by a unique integer number. Such an equilibrium number can be recalled with SELECT_EQUILIBRIUM.
	Initiation code /2/: When an equilibrium is created, you can choose to `ENTER` all components and phases (initiation code 2), `ENTER` the components only (initiation code 1) or `SUSPEND` everything (initiation code 0). No other values are legal. The entered components and phases can later be changed with CHANGE_STATUS.

Syntax

Prompts

Equilibrium number /2/: <A new equilibrium number>

Each equilibrium in the POLY workspace is identified by a unique integer number. Such an equilibrium number can be recalled with SELECT_EQUILIBRIUM.

Initiation code /2/:

When an equilibrium is created, you can choose to ENTER all components and phases (initiation code 2), ENTER the components only (initiation code 1) or SUSPEND everything (initiation code 0). No other values are legal.

The entered components and phases can later be changed with CHANGE_STATUS.