MAKE_COMPONENT_SUSPENDED

This command is for the POLY module.

The MAKE_COMPONENT_SUSPENDED command sets the status for the components to be SUSPENDED in the defined system for all the sequential calculations (single-point, stepping, and mapping) in equilibrium or local/partial equilibrium states. SUSPENDED means that the component(s) are not considered in the calculation. Any conditions that depend on the suspended components are automatically removed.

Removing relevant conditions is unique to this command and does not occur when suspending components with the CHANGE_STATUS command and Suspended option.

Syntax	MAKE_COMPONENT_SUSPENDED
Prompts	Name(s) <Name(s) of the components> The names of the components to set to SUSPENDED (all on one line). A comma or space must be used as separator. An asterisk, "*", can be used to denote all components.

Syntax

MAKE_COMPONENT_SUSPENDED

Prompts

Name(s) <Name(s) of the components>

The names of the components to set to SUSPENDED (all on one line). A comma or space must be used as separator. An asterisk, "*", can be used to denote all components.

This command is useful when an element has a very low amount because you can now ignore it in the calculation instead of reading the entire system from the database. The command is also of use when working in an API with many calculations.