SET_INPUT_AMOUNTS

Specify how a system is made up from mixing of various substances. It is useful with a substance database. In the C-H-O-N system, you can, for example, give:

S-I-A N(H2)=10, N(H2O)=25, N(C1O2)=5, N(N2)=100

The POLY module automatically converts this into conditions for the current set of components. In the case when the elements are defined as the components, the command above is equivalent to

SET-CONDITION N(H)=70, N(O)=35, N(C)=5, N(N)=200

Syntax	set_input_amounts
Prompts	Quantity: <N(<specie>) or B(<specie>)> You can give the amount also preceded with an equal sign `=` [e.g. `N(H2)=10` or `B(H2O)=1000`], or press <Enter> for the next prompt on the amount of the quantity.
	Amount: <Value of the quantity> Specify the numerical value of the quantity. You can give negative amounts in the SET-INPUT-AMOUNTS command.

Syntax

set_input_amounts

Prompts

Quantity: <N(<specie>) or B(<specie>)>

You can give the amount also preceded with an equal sign = [e.g. N(H2)=10 or B(H2O)=1000], or press <Enter> for the next prompt on the amount of the quantity.

Amount: <Value of the quantity>

Specify the numerical value of the quantity.

You can give negative amounts in the SET-INPUT-AMOUNTS command.